Click image to view full size image
Description
Gedele Tinned Straight Copper Lugs are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
Tin plating significantly enhances both mechanical and electrical performance.
The inspection hole provides visual confirmation that the cable has been installed correctly when crimping.
Advantages
Clear marking on palm indicates correct size.
Annealed copper barrel maximizes crimping properties.
Tin plating helps resist corrosive environments.
Specially chamfered at 45˚ at barrel entry to allow easier insertion of flexible, fine stranded conductor.
Operating Temperature
-55°C to 155°C
-67°F to 311°F
Materials
Barrel - High Conductivity Annealed copper (99.9% purity). Electrolytic tin-plated.
Inspection And Testing
Visual inspection
Physical measurement
Weight measurement
Conductor fit
Heat cycling
Mechanical pulling test
| Type | Ø | D | d | L |
| SC(JGY)-1.5 | Ø4.2, Ø5.2 | 3.5 | 2.1 | 18 |
| SC(JGY)-2.5 | Ø4.2, Ø5.2, Ø6.2 | 4 | 2.6 | 19 |
| SC(JGY)-4 | Ø5.2, Ø6.2 | 4.8 | 3.4 | 21 |
| SC(JGY)-6 | Ø5.2, Ø6.2, Ø8.2 | 5.5 | 4.1 | 24 |
| SC(JGY)-10 | Ø6.2, Ø8.2 | 6.5 | 5.1 | 28 |
| SC(JGY)-16 | Ø6.2, Ø8.2, Ø10.5 | 8 | 6.4 | 33 |
| SC(JGY)-25 | Ø6.2, Ø8.2, Ø10.5 | 9 | 7 | 36 |
| SC(JGY)-35 | Ø6.2, Ø8.2, Ø10.5, Ø12.5 | 10.5 | 8.5 | 42 |
| SC(JGY)-50 | Ø8.2, Ø10.5, Ø12.5 | 12 | 9.8 | 49 |
| SC(JGY)-70 | Ø8.2, Ø10.5, Ø12.5 | 14.5 | 11.9 | 55 |
| SC(JGY)-95 | Ø10.5, Ø12.5 | 16 | 13 | 60 |
| SC(JGY)-120 | Ø12.5, Ø16.5 | 19 | 15.4 | 67 |
| SC(JGY)-150 | Ø12.5, Ø16.5 | 20.5 | 16.7 | 73 |
| SC(JGY)-185 | Ø16.5 | 23.5 | 19.3 | 78 |
| SC(JGY)-240 | Ø16.5 | 26 | 21.2 | 92 |
| SC(JGY)-300 | Ø16.5, Ø20.5 | 30 | 24 | 102 |
| SC(JGY)-400 | Ø16.5, Ø20.5 | 34 | 27.6 | 113 |
| SC(JGY)-500 | Ø16.5, Ø20.5 | 38 | 31.6 | 123 |
| SC(JGY)-630 | 20.5 | 45 | 37.6 | 145 |
http://www.gedele-terminal.com/